Refillable Portable Air Can

An empty pressurized can that has been lying around my garage and a handy air pump gave me another idea to make my dusting job a lot easier. 

And.. of course, a valve from discarded bicycle inner tube will definitely complete the project. Ensure to sandpaper, and clean the area to be soldered. Don't forget to remove the inner stem of the inner valve since the stem have some plastic parts. I recommend to using at least 50 watts soldering iron. 

I would stay safe with 60 psi of pressure.

I Modified My Angle Grinder Stand

It has been awhile since I last posted on this site and with all those times of my absence, I thought I was able to completely change my way of doing things, I was wrong, and one day I found myself again messing with stuffs. Here I am again, this time doing things a little bit user friendly.

I added a foot switch for a pleasant on/off switch.

A bit simple look!

 Installed a butterfly nut for quick releasing the grinder, much secured.